FLUIDWELL F112 Intrinsically safe - Flow rate Indicator / Totalizer | with linearization | Modbus, analog and pulse outputs | Ambient temperature: -40°C to +80°C (-40°F to 176°F). kuwait
Brand :
Stock Status :
Contact us for delivery
Brand :
Stock Status :
Out of Stock
Part Number : F112
The F112 is a multifunctional transmitter, totalizer, and flow rate indicator that can accurately linearize the flowmeter signal. Fifteen linearization points with their corresponding frequencies or values can be entered in addition to the average K-Factor or Span. Even for very low frequency applications, the device will interpolate between these locations, significantly improving accuracy in any flow range. Both the output signals and the presented data are impacted by this linearization.
simultaneously shows the total, the flow rate, and any additional accumulated total. From a wide assortment, on-screen engineering units are simple to configure.
Specification
Features
Catalog
Specifications
Details
Input
Flowmeter Inputs Pulse type inputs: Reed-switch, open collector, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal. (0)4 – 20mA. Status Inputs : Remote control: external reset for clearing total or to disable manual clearing by the keypad.
Part Number : F010 FLUIDWELL F010 Intrinsically safe - Flow rate Indicator | Input Signal (0)4 – 20mA | Temperatures between -40°C up to +80°C (-40°F up to 176°F).
Part Number : F011 FLUIDWELL F011 Intrinsically safe - Totalizer | with resettable total and non-resettable accumulated total | Temperatures between -40°C up to +80°C (-40°F up to 176°F).